NIC Teaming LinkedTo Stacked Switch

Multiple switches, when connected using the stack cable, are one logical device. This will gives you two separate switches that you can configure with the same channel group and if one switch fails, you still have that other

Configuring Manual Aggregation Group
A manual aggregation group is manually created. All its member ports are manually added and can be manually removed (it inhibits the system from automatically adding/removing ports to/from it). Each manual aggregation group must contain at least one port. When a manual aggregation group contains only one port, you cannot remove the port unless you remove the whole aggregation group.

LACP is disabled on the member ports of manual aggregation groups, and enabling LACP on such a port will not take effect.

system-view
System View: return to User View with Ctrl+Z.
[furynax] link-aggregation group 1 mode manual
[furynaxlink-aggregation group 1 description Link Aggregation for Server Teaming
[furynax] interface GigabitEthernet1/0/1
[furynax-GigabitEthernet1/0/1] port link-aggregation group 1
[furynax-GigabitEthernet1/0/1] interface GigabitEthernet2/0/1
[furynax-GigabitEthernet2/0/1] port link-aggregation group 1

Display and Maintain Link Aggregation Configuration

[furynax] display link-aggregation summary